Starrett Tape Measure Stix with Adhesive Backing - Mount to Work Bench, Saw Table, Drafting Table - 3/4" x 6', English Metric,
zoom_in
  • Starrett Tape Measure Stix with Adhesive Backing - Mount to Work Bench, Saw Table, Drafting Table - 3/4" x 6', English Metric,
  • Starrett Tape Measure Stix with Adhesive Backing - Mount to Work Bench, Saw Table, Drafting Table - 3/4" x 6', English Metric,
  • Starrett Tape Measure Stix with Adhesive Backing - Mount to Work Bench, Saw Table, Drafting Table - 3/4" x 6', English Metric,
  • Starrett Tape Measure Stix with Adhesive Backing - Mount to Work Bench, Saw Table, Drafting Table - 3/4" x 6', English Metric,
  • Starrett Tape Measure Stix with Adhesive Backing - Mount to Work Bench, Saw Table, Drafting Table - 3/4" x 6', English Metric,
  • Starrett Tape Measure Stix with Adhesive Backing - Mount to Work Bench, Saw Table, Drafting Table - 3/4" x 6', English Metric,

Starrett Tape Measure Stix with Adhesive Backing - Mount to Work Bench, Saw Table, Drafting Table - 3/4" x 6', English Metric,

Starrett
B0026NU7MK
$11.85
rating Read the 8 reviews
Average rating: 4.5/5 Number of reviews: 8

Color White
Brand Starrett
Item Dimensions LxWxH 6 x 0.75 x 0.75 inches
Blade Material Alloy
Steel Blade Length 1.8 Meters

Mounting Capability - Starret Tape Measure Stix can be mounted on workbenches, saw tables, drafting tables, and more. Every stix has a permanent adhesive back that sticks to almost any work surface for convenient, at-a-glance measurements. Durable Material - Our adhesive backing tape measure is made from high-quality precision steel and a Polyurethane protective coating for extended service use. Make Measuring Easy - The tape measure stix easily cuts to proper size with scissors and reads left to right or right to left print orientation in English and Metric graduation styles. Accuracy You Can Count On - Starrett precision measuring tools exceed

block Out-of-Stock

The Starrett Measure Stix is manufactured with high-quality precision steel for extended service use. It is produced with a permanent adhesive backing that will stick to almost any work surface providing convenient, at-a-glance measurements. They can be mounted on workbenches, saw tables, drafting tables, and more. Left to right or right to left print orientation. Starrett's measuring tapes and Measure Stix are offered in a wide range of styles and sizes. Graduations are available in English and Metric to meet virtually every requirement for accurate tape measurement. This tape measure stix has length: 6' (2m), width: 3/4" (19mm), color: White, graduation style number: S12, graduations: 1/16", 1mm. and packaged: card with a blister. The L.S. Starrett Company, founded in 1880, manufactures more than 5,000 variations of Precision Tools, Gages, Measuring Instruments, and Saw Blades for industrial, professional, and consumer markets worldwide. Starrett, a leader who has set the standard for fine precision tools in the industry for over 130 years, has rightfully earned the title, "World's Greatest Toolmakers".

From the brand

From the manufacturer

Starrett Measure Stix

Adhesive Back Measuring Tape

Starrett Measure Stix are manufactured with high quality precision steel.

They have a permanent adhesive backing providing convenient, at-a-glance measurements. Can be mounted on work benches, saw tables, drafting tables, etc.

S1 English Graduations

Graduated in 1/16" on both edges. Numbered in consecutive inches to 1' and repeat on one edge and consecutive inches on the other edge.

S12 English/ Metric Graduations

Lower edge graduated in millimeters and numbered in consecutive millimeters to each decimeter and repeat. Top edge graduated in 16ths of an inch and numbered in consecutive inches and numbered at each foot.

Features

  • High quality precision steel for extended service use
  • Sticks to most work surfaces
  • Easily cut to size with scissors
  • Available in left-to-right or right-to-left

Data sheet

Product Dimensions
‎6 x 0.75 x 0.75 inches
Item model number
‎SM66ME
ASIN
B0026NU7MK
Is Discontinued By Manufacturer
‎No
Item Weight
‎1.97 ounces
Manufacturer
‎Small Parts
Date First Available
November 9, 2004
Material
‎Polyurethane
Color
‎white
Part Number
‎SM66ME
Style
‎English/Metric (Left-to-Right)
Size
‎3/4 x 2m/6\'
Warranty Description
‎Manufacturer
Item Package Quantity
‎1
Shape
‎Round
Pattern
‎Classic
Measurement System
‎Inch
Blade Length
‎1.8 Meters
Batteries Included?
‎No
Batteries Required?
‎No

Specific References

Weather Resistant?
rating 2
04/03/2023
C. G. Clark
Installed this tape to a bench on my dock to facilitate measuring caught fish last August. Worked great all fall fishing season. However, first catch of the 2023 season caused me to discover the measuring tape was gone! Missing!Bought a new tape but it is much narrower than the first and not very user friendly. Will return.Tried a couple times to contact Starrett via their online form but it kept saying I exceeded the 250 character limit so, I gave up. Did not indicate how many characters were actually used and not keen on counting them myself.Maybe tape adhesive is not compatible with cold weather. I was just curious about product warranty.
Accurate and good adhesive
rating 4
01/07/2023
Andy Dittmar
I used this for my table saw fence and it sticks very well and is easy to read.
as described
rating 4
12/20/2022
Betty.evans
as described
Great measuring tape
rating 5
12/02/2022
Annette B
Just what I needed on the front of my sewing table.
Easy to install and read. Good quality.
rating 5
11/11/2022
Donald Anderson
Met my expectations.
Starrett Quality
rating 5
09/30/2022
jcwhidby
Needed a measuring tape to attache to my workbench top. This one is very high quality, made of metal, and adheres to plywood very well. Highly recommended.
Great tape for table saw.
rating 5
09/02/2022
bluejay1959
I recently bought an older Craftsman table saw that someone had positioned the measuring tape incorrectly. I bought the Starrett tape to remedy the problem.
Dead-on accurate, sticks really well
rating 5
05/08/2021
Karl A Perry
I got this to replace the inaccurate measuring strip on a new (to me - I bought it used) rip fence/rails for my older table saw. The strip laid down by the rail manufacturer was progressively inaccurate so by 12" it was over 1/8" longer than the actual measure.Before mounting this, because of prior review comments I laid it out alongside a known-accurate tape measure to check. I found it to be exact. Then I fastened it to the rail with the adhesive backing, and took two other tape measures and compared again (see images). You can see from them that at 30", this Starrett tape exactly equals both of the tape measures.I found I could pull the tape back up immediately after setting it down, to reposition more accurately (I let it wander off an absolutely straight line). It stuck back down just fine. Generally adhesives like this take a bit of time to best adhere, so there is a tiny bit of work time - but you don't want to do it more than once or twice.I cut the tape using tin snips - it seemed a bit thick to use a pair of household scissors.It provides 1/32" divisions to 12", then 1/16" the rest of the tape. The tape makes it easy to see smaller divisions with longer lines at 1", ½", ¼", and ?" divides.The metric scale is divided by millimeters throughout the tape.A great value that will allow me to measure rip widths accurately without having to use a separate tape measure, which will make me more efficient as I work.

8 other products in the category

Starrett 270 7/16-Inch by 6-1/4-Inch Taper Gage Inch and Millimeter Graduation

Starrett 270 7/16-Inch by...

Brand Starrett
Material Tool_steel
Range 0.15 inches
Product Dimensions 0.43"L x 6.25"W
Taper gauge for measuring hole and slot sizes 0.001" graduations from .010 to .150" on one side and 0.05mm graduations from 0.3 to 4mm on the other side Steel body for durability and long life Measures 7/16 x 6-1/4 inches/11 x 160mm (W x L) Made from quality tool steel 7/16" wide by 6 1/4" long Accurately tapered throughout its entire length One side graduated from .010" to .150" Reverse side graduated ffrom0.3mm to 4 mm

rating 0 review
$74.43
search
Stabila 81s-10mh Magnetic Level and Holster 2511

Stabila 81s-10mh Magnetic...

Brand Stabila
Material Alloy Steel
Color Yellow/Black
Item Dimensions LxWxH 9.84 x 0.83 x 1.89 inches
Style Magnetic,Horizontal

Ideal level for scaffolders and steel erectors. 
Accurate to 0.5mm/m in the normal position and 0.75mm/m in overhead position.
Features strong magnets in the measuring surface for a secure hold on steel surfaces. 
Complete with belt pouch. Vials are guaranteed to remain accurate for 10 years. 

rating 0 review
$45.12
search
Starrett 436.1XRL-1 Outside Micrometer, Ratchet Stop, Lock Nut, Carbide Faces, 0-1" Range, 0.001" Graduation

Starrett 436.1XRL-1 Outside...

Brand Starrett
Material Alloy Steel

Range 0-1" Resolution 0.001" Tapered frame for measuring narrow slots and tight spaces Vernier scale in inch units for taking precise outside diameter (OD) measurements Ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurements Satin chrome finish on thimble and sleeve helps resist rust and reduce glare Micro-lapped carbide measuring faces help provide accuracy and wear resistance

rating 0 review
$72.00
search
Extech MO55 – Combination Pin/Pinless Moisture Meter

Extech MO55 – Combination...

Brand Extech
Item Dimensions LxWxH 2.6 x 1.2 x 6.7 inches
Item Weight 0.27 Pounds
Battery Description AA
Mounting Type Wall Mount

Measure Moisture Level in wood, wall board, sheet rock, cardboard, concrete, plaster, and mortar Moisture Icons provide a visual reference for low, medium, and high levels of moisture Audible Alert Tone beeps faster as moisture level increases Pinless Measurement Mode reads moisture up to 1 inches below the surface Data Hold Function freezes readings on display

rating 0 review
$93.75
search
Stihl Wood Digital Moisture Meter

Stihl Wood Digital Moisture...

LCD Display Genuine Quality Product Incl. Batteries and User manual Measuring range: Wood 6-42% Ideal for firewood which requires a moisture content of less than 20% to burn effectivley

rating 0 review
$54.95
search
Stabila 70t Torpedo Level 250mm 02199

Stabila 70t Torpedo Level...

Brand Stabila
Item Dimensions LxWxH 9.84 x 0.79 x 1.97 inches
Style Horizontal
Item Weight 150 Grams
Operation Mode Manual

Top quality torpedo level made by Stabila Only 25 cm in length, this spirit level is so handy that you can carry it around with you all the time. The vertical and horizontal Vials are firmly secured in the strong light metal profile. Measurement accuracy: in the normal position 0.029° = 0.5mm/m. Vials are guaranteed to remain accurate for 10 years.

$25.00
search