Tormek KJ-45 Centering Knife Jig. The Knife Jig that Turns Your Tormek Sharpening System T-8, T-7, T-4, T-3, etc. into a

With Tormek’s patented KJ-45 Centering Knife Jig and KJ-140 Wide Centering Knife Jig, you’ll get symmetrical bevels with the same angle on both sides of the knife, regardless of the thickness or geometry of the blade. Whether you’re sharpening a regular kitchen knife or a thicker, tapered hunting knife, you’ll get the same results on both bevels of the knife without needing to reset the jig. The KJ-45 Centering Knife Jig fits most types of knives: household knives, chef’s knives, craft knives and knives for hunting and fishing. It also works for the woodcarver’s straight drawknives and the gardener’s pruning shears. The KJ-140 Wide Centering Knife Jig is great for long and flexible knives.

When you mount your knife in the KJ-45 Centering Knife Jig, the knife self-centers in the jig, whatever its thickness or geometry. This means that the jig centers everything from the thinnest knives to knives with a thickness of up to 10 mm. It also means that knife blades that taper off from back to edge and heel to tip are centered in the jig, providing symmetrical grinding on both bevels of the knife. Easy setup, perfect results.

Because the KJ-45 Centering Knife Jig is positioned with the stop resting freely against the universal support, you are able to follow the shapes of the knife, always guided by the universal support as a reference point. This makes it possible to sharpen knives with different blade shapes, from craft knives to recurve knives and classic chef’s knives.

For knives with long and flexible blades, such as filleting knives, there is the KJ-140 Wide Centering Knife Jig, which stabilizes flexible blades for even and symmetrical results.