-
Manoxo business standart
Our courier will deliver to the specified address
3-5 Days
Free
-
Manoxo express delivery
Our courier will deliver faster to the specified address
2-3 Days
Paid
Topeak Omni QuickTrack Adapter
Brand Topeak
Material Engineering grade polymer
Item Weight 230 Grams
Item Dimensions LxWxH 12.99 x 3.94 x 2.76 inches
Mounting Type Rear Seat Mount
Compatible: Omni QuickTrack Adapter is compatible with Topeak MTX / RX TrunkBags and MTX rear baskets Adjustable: Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions Material: Omni QuickTrack Adapter is made of engineering grade polymer Mounting Positions: Omni QuickTrack Adapter as four adjustable mounting positions fit different length of rear racks Size: Omni QuickTrack Adapter is available size of 32 x 9.4 x 6.1 cm
$19.19
147 in stock
-
Free 30-Day returns
Payment Methods:
Description
Omni QuickTrack Adapter attaches to a standard rear rack or Racktime system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90 to 120mm with 10 to 12mm rack tube dimensions.
From the manufacturer
Features
|
|
|
|
|
|---|---|---|---|
10mm-12mmFits rack tubes 10mm – 12mm |
4 Mounting Positions4 adjustable mounting positions fit different length of rear racks. |
CompatibleCompatible with Topeak MTX / RX TrunkBags and MTX rear baskets |
Adjustable Mounting BracketsAdjustable mounting brackets accommodate rear rack width 90 mm – 120mm |
Customer Reviews
8 reviews for Topeak Omni QuickTrack Adapter
Clear filtersRelated Products
Customer services
Phone: +13023021699
Email: [email protected]
Copyright ©2024 All rights reserved by ManoXo
Mikey Likes it Ironically (verified owner) –
I’ve been using a full Topeak quik-track rack for two years, and was happy when I finally saw that this was released so I could use the nice rack that came with my new road bike. It is hard to get on 100% strait, but I’ve been using it for several months and have not noticed any of the other issues mentioned in reviews. My main issue is that the plastic track of this item and the plastic rail of the bag cause lots of sticking. I *could* throw some bike grease in there but then its going to be on the bottom of my bag and get everywhere. The metal track of the full rack is much less of a problem for sticking. This is only an issue when putting the bag on, so I would still recommend it if you like the rack you have.
JP Vic (verified owner) –
This adapter is designed for up to 120MM rack – yet on the Polaris Townie 5i Go – my rear rack is 140MM. I’ve seen others make brackets out of metal, but I went with the zip tie method. Just 6 black zip ties. One on each “foot” and then two more thru the center holes on top. In the first pic you can see the ties before I tightened them down. Attached to the forward bar and rear bar. After attached can’t see anything, and seems very sturdy. With the bag attached I picked up the entire bike and shook it around a bit. Very secure.
LucyC (verified owner) –
I had purchased the Topeak MTX trunk bag for my bike a couple of years ago. Now have a Trek e bike that came with an MLK back rack. This omni adapter fit easily over the rack and attached securely.
Doug Garner (verified owner) –
….doesnt work with a standard RAD 5 rear rack without a zip-tie rig job. Shipped faster than expected
Anonymous (verified owner) –
Works well, but requires some modifications if you have a Lectric XP. The 2 included mounting brackets are to short to reach across Lectrics rack, 1st picture.Open the brackets to the widest point then tighten the screws. Now remove the 4 cap screws on the Lectric rack, then push the Omni brackets on to the screws mounting points. The Lectric cap screws are to short to secure the brackets. You’ll need four 5mm x .80 metric bolts 20 – 25 mm long, get CAP bolts. (2nd picture)Mount the Omni rack using the hole closest to the orange latch using the forward hole. You will need to drill a hole for the rear bracket in the Omni rack. I used the cardboard that came with the Omni rack to make a template. Poke a hole and insert a bolt in the forward hole thru the cardboard in to the forward bracket, then use a sharp object like a punch or drill bit to punch a hole for the rear mount. Works great if you pay attention to make sure the hole you drill is in the center of the Om
Bill M (verified owner) –
Works well with my Topeak bag on my Aventon Level ebike. I had to improvise mounting it to the rack. I used zip ties to secure it & it is firmly attached.
RF IN NY (verified owner) –
Look if you absolutely need to adapt a bag to a rack than I guess you have to buy this but it is criminally overpriced.It is a piece of plastic and a few bolts and I cannot fathom why it’s $50. This is truly a 15 to $20 item.
ggj (verified owner) –
Really tried to get this installed on the rack on my REI CTY e2.2 ebike. Couldn’t make it work. The adapter plate clamps can extend to the dimensions of the rack but the configuration of the rack does not allow the clamps to fit into the rack correctly to tighten the clamps to the rack. The adapter plate would work just fine with a compatible rack.